Definition of Original Equipment Manufacturing (OEM)
Installing mosaic tiles is a classic and elegant way to finish a bathroom floor.with moderate skills and theseinstructions any DlIYer can complete this project.The great news is,it's very easy to install flooring on walls.Aslong as you have the right tools and the know-how,you can create a chic accent wall in no-time.
This guide offers essential tips and tricks to get started, and step-by-step instructions to help you through the entireprocess.
Tools and Materials
This is a very DlY-friendly project, but it's good to be wel-prepared.To ensure your project is a success, you need tostart with the right tools and materials.
Here's what you will need.
Tools:
- Caulk gun
- Utility knife
- Laser level
- Nail gun
- Tape measure
- Table saw or circular saw
- Tapping block
- Pull bar
- Hammer
Material:
- Adhesive caulk
- Brad nails
- Laminate flooring planks
Preparation
Before you dive into your project, you need to make sure your installation area is suitable and prepped.
First, ensure you're working with a clean, vertical surface.You shouldn't install laminate on slanted walls or celilings,and the installation area should always be indoors.You shouldn't install laminate on a wall that has previously experienced moisture damage, or in areas where you can expect a lot of water, such as over a bathtub or as abacksplash.
Additionally, there's a limit to how large the accent wall should ideally be.Wwe recommend a maximum area of 4' longand 10' high.
Follow these tips to ensure you're completely ready before you begin.
- Allow the laminate flooring to acclimate to the room for at least two days.
- Remove any baseboards or trim.You can add this again once you're finished.
- Remove any wallpaper or paneling.The ideal wall surface should only be primed or painted.
- Find the wall studs and mark their location.
- lf you're working around outlets or switches, it's a good idea to turn off the power to that area.
Once everything is prepped and ready to go, it's time to start your project!
How to Install Laminate Flooring on Walls
1.Measure Your First Row
Before you fasten anything to the wall, lay out and connect the planks you will need for the first row.Cut the finalplank to fit, ensuring it's at least 6" long.Make sure to account for a 3/160lexpansion gap between the planks andany adjacent walls. If the leftover piece of the plank is also at least 6" long, use it to start the next row.
2.Apply the Planks
Use adhesive caulk on the back of each laminate plank, and carefully press them against the bottom of the wall, withthe tongue side facing down.Having the tongue side face down makes it easier to tap the planks together, and easierto fasten the planks with nails.
