Home > News > Details

How to improve 5g wireless router signal quality at home?

2022.01.02 / By hqt

The kindest time of the day, dear readers! Today you will find out what level of 5g wireless router signal is considered normal and a little about how to improve the quality of the connection. The post will be very short, since the topic is, in fact, one of the most primitive.

What should be the strength of a 5g wireless router?

The strength of a radio wave is measured in dbm, that is, in the ratio of power to one milliwatt. It is always indicated as a negative value, and the larger the number, the stronger the radio wave.

However, for those who have forgotten the school mathematics course, I remind you that, for example, -35 dbm is more than -50 dbm.

5g wireless router

Average Strength of 5g wireless router signal

Namely -35 dBm is an acceptable wi-fi signal level, with which you can work reliably. If the indicator shows the percentage of wave strength, then -35 or more dbm will correspond to 100%. A level of 1% corresponds to a force of -95 dBm, and 50% corresponds to a force of 65 dBm.

It is with this power that interruptions are already observed: packet loss, speed reduction in Mbps, etc.

The normal indicator, in the conditions of most typical apartments, is considered to be a level in the range of at least -60. I recommend 5g wireless router being equal to this indicator.

How to measure the level in decibels?

You should not do this on the router – there the power of wi-fi is always 100%. If you are using a laptop PC running windows 10, Vista or Sevens, I recommend installing the inSSIDer program.

Although the interface of this utility is in English, it is not difficult to deal with it. The value we are interested in is indicated in the RSSI line. You will find several recommendations for improving the quality of radio waves in the publication “How to check the signal of a 5g wireless router “.

Checking the signal strength of the Wi-Fi router or router

Hello friends! In today’s publication, I will tell you how to check the signal of a Wi-Fi router at home on a computer or laptop with Windows 10.

Level Checker

There are a lot of programs for checking networks for signal strength, but I recommend using inSSIDer. This utility can check the power of the wi-fi wave and give some other information about the parameters of the wireless network.

It should be installed on a Windows-based device that connects to the Internet “over the air”.

If your PC connects to a 5g wireless router without an antenna via twisted pair, then it will not work to measure the strength of Wi Fi.

After running the test, first look at the RSSI line. It indicates the signal strength in dbm (decibel in power).

There is nothing complicated: the minus value is indicated, and the lower the number, the better. For example, -20 dbm is a stronger data flow than -50 dbm.

How to improve wifi signal?

5g wireless router 2022

If the level has exceeded -90 dBm, then, to put it mildly, the result is generally “none”, and you should think about improving it.

Also, the program can determine the used channel – the Channel string. Routers used at home have 13 channels. It is possible that in an apartment building you will find a signal from several transmitters at once using this utility.

In this case, pay attention to which of the channels is the freest. If you configure your 5g wireless router to work with it, you can achieve the least loss of data transfer rate.

Let me draw your attention to the fact that there are no workable online versions of such testers.

If you are lured to a site and promise to check everything that is possible, then its owners simply attract additional traffic.

How to improve 5g wireless router signal quality at home?

Here are some tips on how to get a strong signal at home:

  • Place the router at a height of one to one and a half meters from floor level – for example, on the table where your PC is located.
  • When using an external antenna, try to raise it as high as possible.
  • If your router has 2 antennas, place them at a 90-degree angle. If there are three antennas, the angle should be 45 degrees.
  • Make sure that there are no significant obstacles in the path of the Wi-Fi waves, for example, reinforced concrete partitions.
  • Keep the router away from other household appliances, especially microwave ovens or radios.
  • If the router still does not finish off at some point in the dwelling, use a repeater.

If all these tricks do not help, I advise you to change the 5g wireless router and buy a more powerful one.

What does a 2-band router mean?

You probably remember from the school physics course. Radio waves have a wave nature. They are created by the oscillatory circuit of a device capable of this. Hence, one of the characteristics of a wave is frequency.

The first successful Wifi router models used the 2.4 GHz frequency. In order not to change the standard, just such a frequency was reserved for Wi-Fi, and any modern router should be able to work on it.

However, there is one small “but”. This frequency is used by the same type of devices. In some places, the air can be overloaded with data streams. For example, it can be in an apartment building or a large student dormitory. Competition for ether leads to slower speeds and disruptions.


Given this disadvantage, manufacturers eventually introduced another frequency for wi-fi – 5 GHz. It can be supported by a modern 5g wireless router, but this is no longer a prerequisite.

The advantage is that the default frequency is 2.4 GHz, and you need to reconfigure your router to upgrade to a higher frequency.

Provide a stable network for the home office, allowing you to enjoy 5G speed.

Customize your own model now: sales@sailskywifi.com

share :

Get A Quick Quote